An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on 16 bit hard disk cleaner, erasing hard drives, degaussing equipment, and degaussing services, see also: how to clean up your hard drive to make more room completely erase a: floppy disk securing access data without user-level security hard drive wipeout how to erase files on a audio cd how do i delete all files on my hard drive secure erase for new install 16 bit hard disk cleaner free clean hard drive windows 2000 hard disk clean old compressed files slow erase hard disk mac keyboard command unix and wipe disk and erase all media cleaner reviews free hard drive clean download how do i completely erase a hard drive how to delete hard drive hard drive wipeout delete hard drive partition rsa data security hard disk clean up software format hard drive erase government data clean what is degauss posistor erase macintosh harddrive delete data miner v91m hd hard disk drive degausser how to delete unused data in ms systems config erase hard disk mac keyboard command clean and re format hard drive secure erase hard drive bulk audio tape eraser info about data security download a program to erase your hard drive ptc degaussing data link layer security data center security partitions securing access data without user-level security clean a hard drive disc cleaner totally erasing a hard drive hard drive wipe xp

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on 16 bit hard disk cleaner, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: