An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on bulk audio tape eraser, erasing hard drives, degaussing equipment, and degaussing services, see also: delete from data adapter how to delete hard drive software to erase hidden files completely wipe hard drive free free hard drive clean download how do i delete my hard drive will mother board failure erase data on hard disk software to clean up hard drive destroy data and hard drive and emergency erase unix hard drive data completely wipe hard drive expo dry erase cleaner material safety data sheet clean program from hard drive completely degauss equipment how do i delete my hard drive hard drive clean sweep erase hard drive on mac how to clean up your hard drive best media cleaner settings bulk audio tape eraser honeywell media air cleaner hard drive erase program degaus destroy data and hard drive and emergency mbi degaus security issues in data facility management how to wipe hard drive clean up ads from the hard drive tape head cleaner what will happen if i erase my hard drive how to degauss your television erase cd clean hard drive cookies erase hard disk mac keyboard command selling computer erase disk dell d266 degaussing info about data security selling computer erase disk delete hard drive partition how do i delete all files on my hard drive

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on bulk audio tape eraser, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: