An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on clean a hard drive, erasing hard drives, degaussing equipment, and degaussing services, see also: tape head cleaner homeland security data bases how do magnet erase tape memory permanently delete files from hard drive how to degauss your television hard drive wipeout buy tv degausser wipe hard drive software expo dry erase cleaner material safety data sheet erase a hard drive steps free hard drive wipe clean and re format hard drive vhs tape erases wipe out a hard drive homeland security data bases hard disk clean up software clean hard drive reinstall windows 98 hard disk clean up software free securing access data without user-level security data security policies how to clean up your hard drive maryland state data security script to erase media from tape what can i do to clean up my hard drive security data guard technology compact disk data security car;isle degausser 4000 hard disk data wipe tools clean install of windows instructions format hard drive campus data and security completey erase harddrive what is degauss posistor hard disk clean up software free clean a hard drive data security controls degauss goldschmidt chemical co erase hard drive computer free erase macintosh harddrive free temporary file erase format hard drive erase government data clean

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on clean a hard drive, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: