An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on clean hard drive xp, erasing hard drives, degaussing equipment, and degaussing services, see also: homeland security data bases erase a hard drive permanently maryland state data security v91m hd hard disk drive degausser erase internet files how to delete unwanted files from hard drive why can't i erase data off my cd-rw disc hard drive cleaning tips cd rw and erase ships degaussing principle hard drive wipeout honeywell media air cleaner what is degauss posistor windows 3.1 disk erase how to wipeout a hard drive hard disk data wipe tools how to wipeout a hard drive erase hard drive reinstall windows me how to delete unwanted files from hard drive m100 erase all data destroy data and hard drive hard disk clean up software free computer virus erases data on hard drive campus data and security erase index.dat files erase files software security issues in data facility management bulk audio tape eraser erase data hard drive pc hard disk cleaner maryland state data security erase hard drive on mac data protection and security info about data security expo dry erase cleaner material safety data sheet hard disk clean up software free free temporary file erase securing access data without user-level security degauss video data security controls

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on clean hard drive xp, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: