An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on degausing coil construction, erasing hard drives, degaussing equipment, and degaussing services, see also: data transmission security hard drive erase program data center security partitions expo dry erase cleaner material safety data sheet destroy data and hard drive and emergency mbi degaus security issues in data facility management rsa data security how to clean out hard drive on computer completely erase a: floppy disk wipe hard drive with cipher.exe clean a hard drive erase files in the restore directory definition of data cleaning erase unix hard drive data sdlt tape eraser degauss goldschmidt chemical co erase cd-r how to delete unused data in ms systems config completely wipe hard drive free delete partitions on hard drive erase hard drive reinstall windows me destroy data and hard drive bulk audio tape eraser lost data in windows security event log erase data hard drive clean out hard drive and reinstall os erase first sector on hard drive home security equipment data how to clean up your hard drive to make more room what will happen if i erase my hard drive car;isle degausser 4000 homeland security data bases car;isle degausser 4000 politician wipes hard drive media cleaner profiles download tape head cleaner government data security color codes software to erase hidden files erase access denied files

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on degausing coil construction, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: