An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on degaussing color monitors, erasing hard drives, degaussing equipment, and degaussing services, see also: erase aol cd erase unix hard drive data hard drive wipe xp delete data miner clean out hard drive and reinstall os degaussing facilities ships degaussing principle dss files erase degauser coil wipe hard drive with cipher.exe delete from data adapter delete hard drive to reinstall windows 98se data link layer security clean out hard drive and reinstall os how to erase a cd erase cd-r erase macintosh harddrive definition of data cleaning windows 3.1 disk erase degaussing color monitors data warehouse control and security wipe hard drive with cipher.exe erase all data palm how do magnet erase tape memory clean install of windows instructions format hard drive data security policies degauss coil wand degaussing facilities mbi degaus does formatting hard drive erase data completely script to erase media from tape data center security partitions data transmission security car;isle degausser 4000 how do i wipe my hard drive clean clean up ads from the hard drive delete your hard drive unix tool erase disk tape cleaner media cleaner reviews

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on degaussing color monitors, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: