An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on delete partitions on hard drive, erasing hard drives, degaussing equipment, and degaussing services, see also: video tape eraser erase first sector on hard drive how do magnet erase tape memory erase access denied files best media cleaner settings dss files erase destroy data and hard drive and emergency degauss thermistor tape cleaner mbi degaus how to delete unused data in ms systems config what is degauss posistor degaussing tutorials delete hard drive to reinstall windows 98se media cleaner profiles download v91m hd hard disk drive degausser r.s. andrews high efficiency media retrofit air cleaner hard drive scrub porn hard disk cleaners how do i erase a hard drive info about data security delete your hard drive security issues in data facility management erase files in the restore directory hard drive cleaning tips clean and re format hard drive hard drive wipe xp erase free space on hard drive data security controls clean hard drives clean hard disk hard drive scrub campus data and security erase access denied files hard drive scrub porn delete from data adapter degauss video how to wipe your hard drive v91m hd hard disk drive degausser selling computer erase disk

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on delete partitions on hard drive, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: