An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on erase all data palm, erasing hard drives, degaussing equipment, and degaussing services, see also: windows 2000 hard disk clean old compressed files slow pc hard disk cleaner security data guard technology hard drive scrub porn hard drive cleaning tips erase cd freeware hard drive erase program offshore data security why can't i erase data off my cd-rw disc clean a hard drive erase hard disk mac keyboard command tape head cleaner how to delete unused data in ms systems config delete from data adapter v91m hd hard disk drive degausser tape head cleaner free hard drive clean download erase cd ptc degaussing script to erase media from tape data center security partitions maryland state data security erase hard drive microsoft software to clean up hard drive security data guard technology hard drive scrub campus data and security how to erase a cd unix tool erase disk how to degauss your television what is degauss posistor media cleaner profiles download clean install of windows instructions format hard drive unix tool erase disk data protection and security degaus free temporary file erase erase cd freeware erase cd freeware thompson financial security data

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on erase all data palm, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: