An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on format hard drive erase government data clean, erasing hard drives, degaussing equipment, and degaussing services, see also: erase aol cd erase data on hard drive info about data security bulk audio tape eraser security data guard technology cleaning up hard drive rsa data security sony trinitron degauss circut key to installing an upgrade cd in a clean hard drive sony trinitron degauss circut expo dry erase cleaner material safety data sheet data security controls homemade tv degausser erase aol cd how to clean up your hard drive to make more room m100 erase all data sdlt tape eraser script to erase media from tape clean and re format hard drive completey erase harddrive buy tv degausser can a magnet erase my hard drive mbi degaus v91m hd hard disk drive degausser windows 3.1 disk erase hard disk clean up software wipe hard drive software clean hard drive completely sdlt tape eraser r.s. andrews high efficiency media retrofit air cleaner expo dry erase cleaner material safety data sheet how to erase files on a audio cd media cleaner reviews v91m hd hard disk drive degausser unix and wipe disk and erase all media cleaner reviews software to erase hidden files grid data security erase cd freeware computer virus erases data on hard drive

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on format hard drive erase government data clean, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: