An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on hard disk erase, erasing hard drives, degaussing equipment, and degaussing services, see also: format hard drive erase government data clean free clean hard drive unix and wipe disk and erase all amon's disk eraser delete your hard drive mbi degaus hard drive scrub porn sony trinitron degauss circut politician wipes hard drive hard drive cleaning tips destroy data and hard drive degauss thermistor campus data and security destroy data and hard drive how do i delete all files on my hard drive clean and re format hard drive how to delete unwanted files from hard drive clean and re format hard drive erase all data palm secure erase hard drive m100 erase all data media cleaner reviews erase hard drive computer free expo dry erase cleaner material safety data sheet sdlt tape eraser software to clean up hard drive campus data and security degauss equipment driver to erase rewrite cd securities data corporation grid data security degauss video ptc degaussing lost data in windows security event log cleaning up hard drive download a program to erase your hard drive hard disk clean up software free key to installing an upgrade cd in a clean hard drive how to erase files on a audio cd security data guard technology

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on hard disk erase, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: