An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on home security equipment data, erasing hard drives, degaussing equipment, and degaussing services, see also: clean program from hard drive completely delete hard drive partition free hard drive clean homemade degausing coil how to degauss your television destroy data and hard drive and emergency car;isle degausser 4000 unix and wipe disk and erase all mds-4 degausser & prices software to erase hidden files amon's disk eraser buy tv degausser script to erase media from tape erase files in the restore directory securities data corporation wipe out a hard drive delete data miner permanently delete files from hard drive erase internet files degauser coil campus data and security homeland security data bases disc cleaner how do i erase a hard drive how to erase hard drive in dos erase index.dat files can a magnet erase my hard drive homeland security data bases how to clean a hard drive clean files degauss coil wand degausing coil construction tape cleaner download a program to erase your hard drive erase macintosh harddrive cd rw and erase how to delete unwanted files from hard drive completely erase hard drive buy tv degausser mbi degaus

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on home security equipment data, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: