An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on permanently delete files from hard drive, erasing hard drives, degaussing equipment, and degaussing services, see also: secure erase for new install how to delete unwanted files from hard drive clean hard drive reinstall windows 98 degaussing facilities degaus degauss goldschmidt chemical co government data security color codes how to delete hard drive lost data in windows security event log thompson financial security data completely erase hard drive secure erase for new install cd-rw erase erase files software hard drive scrub porn homemade degausing coil how to clean a hard drive delete from data adapter erase aol cd clean and re format hard drive erase macintosh harddrive wipe hard drive with cipher.exe download a program to erase your hard drive wipe hard drive with cipher.exe securing access data without user-level security homemade degausing coil how do i delete my hard drive does formatting hard drive erase data completely erase data on hard drive security issues in data facility management how to clean up your hard drive to make more room completely erase hard drive erase hard drive computer free what can i do to clean up my hard drive expo dry erase cleaner material safety data sheet tape head cleaner cd rw and erase clean up ads from the hard drive erase data hard drive why can't i erase data off my cd-rw disc

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on permanently delete files from hard drive, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: