An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on r.s. andrews high efficiency media retrofit air cleaner, erasing hard drives, degaussing equipment, and degaussing services, see also: vhs tape erases mbi degaus delete hard drive to reinstall windows 98se degauss coil wand securing access data without user-level security how to wipe your hard drive campus data and security sony trinitron degauss circut securities data corporation government data security color codes will mother board failure erase data on hard disk erase hard drive microsoft how do i wipe my hard drive clean erase aol cd clean and re format hard drive hard disk clean up software free how to wipe your hard drive mbi degaus how do i delete all files on my hard drive expo dry erase cleaner material safety data sheet sdlt tape eraser script to erase media from tape delete from data adapter erase hard drive microsoft how degaussing works erase disk clean and re format hard drive homemade degausing coil erase cd freeware clean hard drive cookies software to clean up hard drive erase unix hard drive data script to erase media from tape software to erase hidden files software to clean up hard drive erase cd freeware hard drive erase program how to wipe your hard drive erase data hard drive how to clean out hard drive on computer

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on r.s. andrews high efficiency media retrofit air cleaner, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: