An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on rsa data security inc., erasing hard drives, degaussing equipment, and degaussing services, see also: clean a hard drive key to installing an upgrade cd in a clean hard drive v91m hd hard disk drive degausser delete data miner how do magnet erase tape memory erase files in the restore directory sdlt tape eraser wipe out a hard drive degauss video hard disk data wipe tools delete hard drive to reinstall windows 98se hard disk data wipe tools cd rw and erase homemade degausing coil windows 3.1 disk erase lost data in windows security event log degaussing facilities erase media from 8mm tape the easy way data security controls lost data in windows security event log m100 erase all data how to clean a hard drive unix and wipe disk and erase all completely erase a: floppy disk definition of data cleaning how do magnet erase tape memory how do i wipe my hard drive clean securities data corporation homemade degausing coil clean hard drives download a program to erase your hard drive ships degaussing principle hard disk clean up software free delete partitions on hard drive erase hard disk mac keyboard command data link layer security data security controls why can't i erase data off my cd-rw disc how to clean up your hard drive erase disk

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on rsa data security inc., degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: