An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on what can i do to clean up my hard drive, erasing hard drives, degaussing equipment, and degaussing services, see also: format hard drive erase government data clean how to delete hard drive offshore data security how to clean a hard drive how to erase a video tape securing access data without user-level security clean hard drive completely how to erase a video tape erase all data palm thompson financial security data cd rw and erase degauss equipment how to delete unwanted files from hard drive wipe out a hard drive securing access data without user-level security key to installing an upgrade cd in a clean hard drive computer virus erases data on hard drive delete files from hard drive sony trinitron degauss circut hard drive wipeout why can't i erase data off my cd-rw disc delete hard drive to reinstall windows 98se degauss thermistor permanently delete files from hard drive data warehouse control and security clean up ads from the hard drive format hard drive erase government data clean secure erase for new install permanently delete files from hard drive erase hard drive on mac clean hard drive completely degaussing facilities rsa data security inc. wipe hard drive software erase cd freeware destroy data and hard drive v91m hd hard disk drive degausser r.s. andrews high efficiency media retrofit air cleaner windows 2000 hard disk clean old compressed files slow degaus

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on what can i do to clean up my hard drive, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: